Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Insigna
    4. : How do you replace the cabin filter on the Opel Insignia?

Vauxhall Insigna - Video tutorial

Model: Vauxhall Insigna Insigna B, MK 2 - Years 2017-2024
Part: Cabin air filter
Operation: How do you replace the cabin filter on the Opel Insignia?

In order to replace the cabin filter of the Opel Insignia, the glovebox located on the passenger side must be opened: once this is open, all the rivets inside the drawer must be removed, removing it completely. In its back. There will be the air filter behind the special door: by lowering the latter, the filter can be extracted from its housing and replaced with a new spare part. After replacement, you will be able to reassemble all the parts removed previously.


Posted on 20 March 2024 by ScegliAuto



How to replace the cabin filter of the Opel Insignia B.
Vauxhall Insigna (2017-2024 / Insigna B, MK 2) In this new mini guide, we will describe in a few lines the various steps required to correctly replace the cabin air filter of your Opel Insignia B.
How to replace the cabin air filter on the Opel Insignia series B
Vauxhall Insigna (2017-2024 / Insigna B, MK 2) The guide shows how to replace the cabin air filter on the Opel Insignia B series. The first step is to remove the external trim panel of the dashboa
Where is the fuel filter located and how to reach it on an Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Good morning, today we are here to discover where the diesel filter of our Opel Insignia is located and understand how to reach it. The filter is loc

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos