Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on an Opel Corsa D 1.2 Petrol Engine?

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Spark plugs

See other generations:
Video tutorial

This guide shows how to replace the spark plugs on an Opel Corsa D series with a 1.2 petrol engine. From the engine bay, slide the plastic bar with the Opel logo to the right and unscrew the two Torx T30 screws, then disconnect the electrical cable.

Remove the spark plug power module. Using a 16 mm socket, unscrew the spark plugs from their respective holes and extract them; you can assist extraction with the terminal of the spark plug control module.

Insert the new spark plugs in position and tighten them to a torque of 25 Nm. Refit the control module and tighten the two Torx screws. Reconnect the control cable and close the engine cover.

Check the engine's proper functioning.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on an Opel Corsa
How to Replace the Spark Plugs on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can start, open the bonnet of your Opel Corsa. Begin by removing the engine cover. This will give you the necessary space to work on the e…
Replacing Spark Plugs on Opel Corsa
Replacing Spark Plugs on Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) In this video, you will learn how to remove the spark plugs from the engine of an Opel Corsa. First, open the bonnet and remove the engine cover by u…
Removing Spark Plugs on Opel Corsa
Removing Spark Plugs on Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) Are the spark plugs on your Opel Corsa due for a change? Here’s how to remove them. Lift the front bonnet and secure it. Remove the engine soundproof…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos