Do it yourself
| ||||
|
How to reset the oil change interval warning light on the 2016 Vauxhall Astra
Model: Vauxhall Astra
Astra K
- Years 2015-2022 For this guide we will see how to reset the oil change light for the Vauxhall / Opel Astra from 2016 onwards. It should be noted that the following procedure is also valid for resetting other warning lights present in the vehicle menu items. The steps to follow are, in order: 1. Activate the instrument panel with the key; 2. Use the directional controller for the menu located on the right of the steering wheel to scroll through the various items, until you reach the one concerned; 3. Press and hold the OK button located in the center of the controller, until an audible beep is heard; 4. To verify that the reset was successful, restart the instrument panel and check the new percentage indicated on the screen.
Posted on 22 May 2024 by ScegliAuto
How to reset the oil change message on Opel Astra
Vauxhall Astra (2009-2016 / Astra J) To reset the message indicating the maintenance interval for oil change on Opel Astra, just follow this simple procedure: with the ignition off, pres
To reset the oil warning light on the Opel Astra J.
Vauxhall Astra (2009-2016 / Astra J) If the engine oil warning light on your Opel Astra J dashboard does not turn off even after recently changing the oil and the oil filter, then you mu
What does the light with a car and a wrench indicate in the Opel Astra, and how can it be removed?
Vauxhall Astra (2004-2010 / Astra H) If the dashboard of our Opel Astra has the warning light depicting a car and a wrench turned on, it means that it is time to perform the scheduled ma Other guides that may interest you
|
Frequently Asked QuestionsHow to deactivate the safe lock on a Volkswagen Golf.The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.105
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |