Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cylinder Head Gasket and Camshaft Oil Seal Replacement

Model: Vauxhall Kadet Kadet E - Years 1984-1993
Part: Engine

Before inserting the new camshaft, lubricate it thoroughly and then attach the external mounting plates. Next, insert the oil seal after lubricating it, pushing it fully into its seat. Position the new cylinder head gasket and the cylinder head itself; lubricate the seats of the rocker arm support pins and insert the new pins before completing the camshaft installation. Finally, tighten the cylinder head using a series of new bolts in a cross pattern, employing a torque wrench. Align the timing references before installing the timing belt.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Cylinder Head Resurfacing and Engine Gasket Kit Replacement
Cylinder Head Resurfacing and Engine Gasket Kit Replacement
Vauxhall Kadet (1984-1993 / Kadet E) When replacing the cylinder head gasket, you must practically disassemble the entire upper part of the engine, and during reassembly, it is absolutel…
Replacing Camshaft Oil Seal
Replacing Camshaft Oil Seal
Vauxhall Kadet (1984-1993 / Kadet E) The camshaft oil seal is also included in the gasket kit; before inserting it, it must be generously lubricated using clean engine oil. At this point…
Replacing the Valve Stem Seal
Replacing the Valve Stem Seal
Vauxhall Kadet (1984-1993 / Kadet E) Replacing the valve stem seal is a challenging task that requires some mechanical knowledge. It is important to know that each seal, whether right or…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos