Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter on the Opel Zafira Series B

Model: Vauxhall Zafira MK 2, A05, Zafira B - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Oil filter

See other generations:
Video tutorial

This guide shows how to change the engine oil and filter on the Opel Zafira Series B. The first step is to unscrew the cap of the oil reservoir and the dipstick. From underneath the vehicle, use a Torx T45 screwdriver to unscrew the drain plug of the oil sump.

From the engine compartment, use a 24 mm spanner to unscrew the cover of the filter housing, located between the engine and the radiator. Remove the old filter and its gasket and replace them with the new kit. Refit the filter in position.

From underneath the vehicle, clean any oil residue and tighten the plug. Fill the reservoir with the appropriate amount of oil and start the engine for a few minutes.

Check the fluid level again and top up as necessary.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Change or Top Up the Engine Oil on the Opel Zafira
How to Change or Top Up the Engine Oil on the Opel Zafira
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) In this guide, you will see the steps that allow you to top up or replace the engine oil, as well as the oil filter, on the Opel Zafira. First, open …
How to Replace the Air Filter of the Opel Zafira
How to Replace the Air Filter of the Opel Zafira
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) To discover the steps to correctly replace the air filter of your Opel Zafira Mk3, read this dedicated guide carefully and follow the instructions st…
Replacement of the standard radio of the Opel Zafira
Replacement of the standard radio of the Opel Zafira
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) The following instructions will allow us to disassemble and replace the original radio of the Opel Zafira. First, we get into the car and start remov…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos