Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulb on the Opel Astra J?

Model: Vauxhall Astra Astra J - Years 2009-2016
Part: Tail light bulb

In order to replace the rear light bulb of the Opel Astra you have to open the tailgate of the luggage compartment, so that you can remove the internal side panel of the trunk, in correspondence with the bulb to be replaced. Under this panel you will find the screws that must be unscrewed, thus allowing the lighthouse to be removed from inside its housing. By disconnecting the connectors at the rear, it will be possible to open the headlight by removing the old bulb and replacing it with a new one. After installation, the headlight will have to be fixed again.

Posted on 8 September 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear headlight bulb of the Opel Astra.
Replacement of the rear headlight bulb of the Opel Astra.
Vauxhall Astra (2015-2022 / Astra K) Below we will see the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Opel Astra. First, open the r…
How to replace the rear headlight bulb of the Opel Astra H
How to replace the rear headlight bulb of the Opel Astra H
Vauxhall Astra (2004-2010 / Astra H) Replacing the left rear headlight bulb of the Opel Astra H is a task that can be done independently, thanks to our short video tutorial. The first st…
How to replace the rear headlight bulb of the Opel Astra
How to replace the rear headlight bulb of the Opel Astra
Vauxhall Astra (2009-2016 / Astra J) Replacing the right rear headlight bulb of the Opel Astra model J is a fairly simple and quick operation to perform independently. The first step is …

Other guides you may be interested in

How to Remove the Brake Disc on Mitsubishi Pajero

How to remove the brake disc along with the brake pads on a Mitsubishi Pajero? First, lift the vehicle on a column lift to a suitable height for working. Next, remove the wheel (using a telescopic spanner or air drill) with the respective bolts. Undo the locking bolt of the brake caliper, and remove it from the caliper support. Remove the caliper support from the wheel hub using a socket spanner. Once the brake disc is free, undo the screws with a fixed spanner and detach the disc from the wheel hub. Disconnect the various wiring and brake fluid pipes from the wheel assembly. Replace them with new parts (always use original and compliant parts). Prepare to install the new disc along with the respective pads, brake caliper, caliper support, etc.

Watch the video!


by ScegliAuto

More videos