Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs in an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Light bulb

In today's video, we will see how to remove the front light units in the fourth generation Opel Corsa, the D. To assist us, we can slightly lift the car on a ramp or jack. Next, rotate the wheel in the opposite direction of the intervention. Unscrew the screws found in the wheel arch. Then, open the front bonnet and unscrew the screws securing the bumper to the car body. Next, unscrew the screws of the headlights and remove them from their positions, taking care to disconnect the power connectors. Replace the blown bulbs and proceed with reassembly.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulbs on an Opel Corsa
How to Replace the Rear Headlight Bulbs on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Are the bulbs in the rear headlight of your Opel Corsa no longer working? Learn how to replace the rear headlight bulbs. Open the boot lid, then remo…
Replacing Rear Bulbs on Opel Corsa D
Replacing Rear Bulbs on Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) Today, in this video tutorial, you will learn how to remove and replace all the bulbs in the rear light of an Opel Corsa D. First, lift the boot lid …
How to Replace the Front Headlamp Bulbs on an Opel Corsa
How to Replace the Front Headlamp Bulbs on an Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Learn how to replace the front headlamp bulbs on an Opel Corsa. Release the front bonnet by pulling the lever located at the bottom right of the dash…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos