Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Exhaust Manifold Gasket

Model: Vauxhall Corsa Corsa B - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Engine

See other generations:
Video tutorial

The gasket kit always includes the exhaust manifold gasket, which is shaped like a metal sheet; before proceeding with the installation of the new gasket, ensure there are no dirt residues or deposits that could compromise the adhesion and sealing of the gaskets, both on the cylinder head side and the manifold side; then insert the new gasket aligning it with the dowel pins, apply the manifold, and tighten the respective fixing nuts using a suitably calibrated torque wrench (it is not necessary to apply gasket sealant).


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacement of Engine Manifold Gasket
Replacement of Engine Manifold Gasket
Vauxhall Corsa (1993-2000 / Corsa B) The intake manifold is a cover located on the top of the engine and is secured to it with a gasket. When this gasket fails, it can cause coolant leak…
How to Replace the Lambda Sensor on an Opel Corsa
How to Replace the Lambda Sensor on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) In today's video, we will see instructions on how to remove and replace the lambda sensor or oxygen sensor on an Opel Corsa. First, lift the vehicle …
Cleaning the Exhaust Gas Recirculation Circuit on Opel Corsa 1.3 CDTI
Cleaning the Exhaust Gas Recirculation Circuit on Opel Corsa 1.3 CDTI
Vauxhall Corsa (2006-2014 / Corsa D) The EGR valve introduces a portion of exhaust gases back into the intake to reduce emissions. Continuous contact with exhaust gases, often contaminat…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos