Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Service warning light

Resetting the engine oil light on your first-generation Opel Mokka (2012-2019) is a straightforward and quick procedure. First, insert the key and turn on the ignition. Next, use the knob on the left side of the steering wheel to navigate through the onboard computer menu. Once you find the option related to the oil life, press and hold the "Set/CLR" button as indicated on the display. Wait a few seconds, and once the reset is complete, release the button, and you are done.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset "Code 82" on an Opel Mokka
How to reset "Code 82" on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Start by sitting in the driver's seat of your Opel Mokka. Next, turn the key in the ignition switch to turn on the instrument panel. Once done, press…
How to reset the Opel Mokka to factory settings
How to reset the Opel Mokka to factory settings
Vauxhall Mokka (2012-2019 / Mokka A) If the infotainment system of your first series Opel Mokka presents anomalies at the software level, do not worry because in the following guide we w…
Reset the Tyre Pressure Warning Light on the Opel Mokka
Reset the Tyre Pressure Warning Light on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this guide, you will find instructions on how to reset the tyre pressure warning light on the Opel Mokka; before resetting the TPMS sensors, ensur…

Other guides you may be interested in

    Frequently Asked Questions

    • Mokka 2012-2019 - How do you reset the service light on the Opel Mokka? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos