Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heating Console Bulbs in the Opel Corsa?

Model: Vauxhall Corsa Corsa B - Years 1993-2000
Part: Light bulb

In this tutorial, you will learn how to replace the heating console bulbs in the Opel Corsa, a very simple and quick operation. Start by prising off the trim around the air recirculation lever using a flat-head screwdriver or preferably a plastic spatula. Next, unscrew the two screws that are now exposed and proceed to remove both upper air vents. Unscrew the additional screws indicated, remove the upper panel, and separate the console from the dashboard. At this point, disconnect the internal connector, remove the bulb holder, and proceed with the replacement.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Heating Radiator from the Opel Corsa
Removing the Heating Radiator from the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Follow the procedure to remove and replace the heating radiator in the Opel Corsa. First, open the bonnet of your car and disconnect the radiator flu…
Why is the heating system of the Opel Corsa D not working?
Why is the heating system of the Opel Corsa D not working?
Vauxhall Corsa (2006-2014 / Corsa D) When the heating system of the 2009 Opel Corsa D is not working, the cause is almost always related to a faulty heating relay. In such cases, replaci…
How to Replace the Heating Resistor of an Opel Corsa
How to Replace the Heating Resistor of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) The heating resistor for the cabin is located at the back of the glove compartment. To begin, sit in the front passenger seat of your Opel Corsa. Sta…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos