Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Filter on an Opel Astra J

Model: Vauxhall Astra Astra J - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Cabin air filter

See other generations:
Video tutorial

To change the cabin filter in your Opel Astra, access it through the glove compartment in the cabin. Start by unscrewing the 4 screws that hold it in place.

On the side of the drawer, there is an airbag housing. This needs to be removed, but first, turn the key to OFF! To remove it, lever it out and then take it off, as it is fitted under pressure, but be careful with the seal! Under the passenger airbag, there is another screw for the glove compartment.

Unscrew this and now it can be removed. With the drawer out, you will see the filter.

On the side, there are levers; push them and the filter drawer will open. Ensure that the arrows on the new part always point downwards.

Remove any dirt that is likely there and after taking out the worn part, replace it with the new one. Close its cover. Refit the glove compartment, starting with the screw under the passenger airbag, and then the passenger airbag itself.

The job is done.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

Vauxhall Astra (2015-2022 / Astra K) The procedure you need to follow to independently change the cabin air filter of your Opel Astra K is practically identical to that required for many…
Vauxhall Astra (2015-2022 / Astra K) If you own an Opel Astra K and want to learn how to replace the cabin air filter without the help of a professional, all you have to do is follow the…
Vauxhall Astra (2015-2022 / Astra K) You can replace the cabin filter on the Opel Astra by opening the glove compartment located on the passenger side: then loosen the screws that secure…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos