Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump on an Opel Corsa

Model: Vauxhall Corsa Corsa E - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Pump

See other generations:
This video is currently unavailable

To replace the water pump on an Opel Corsa, access the left side of the engine bay to reach the timing belt housing. Here, you will locate the water pump pulley, which must be removed by unscrewing its mounting screws: this will allow you to access the water pump beneath the pulley.

The pump must then be removed from its housing by unscrewing its mounting screws and disconnecting the appropriate hoses, so that you can insert the new one; after installation, reassemble all previously removed parts.


Updated on 8 July 2026 by ScegliAuto


Related tutorials

Replacing the Water Pump on Opel Corsa
Replacing the Water Pump on Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Replace the water pump on the Opel Corsa. Remove the pump from inside the engine bay. Lift the front bonnet of the car to access the pump. Disconnect…
How to Replace the Water Pump on the Opel Corsa 1.2
How to Replace the Water Pump on the Opel Corsa 1.2
Vauxhall Corsa (2006-2014 / Corsa D) Today's main steps will show you the process of removing and replacing the water pump on the Opel Corsa 1.2. First, open the bonnet of the vehicle an…
How to Replace the Water Pump on an Opel Corsa?
How to Replace the Water Pump on an Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) To replace the water pump on an Opel Corsa, open the bonnet to remove the plastic cover on the left side of the engine block: underneath, you will fi…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos