Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Opel Adam?

Model: Vauxhall Adam MK 1 - Years 2013-2019
Part: Service warning light

To reset the Service light on the Opel Adam, turn on the ignition and then press the MENU button located on the lever to the left of the steering wheel: this will allow you to navigate through the menu using the up and down arrows until you find the oil life indicator. At this point, press and hold the SET/CLR button located at the end of the lever for a few seconds: this will reset the oil life, and you will notice that the Service light will disappear from the instrument cluster.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on an Opel Adam
How to Reset the Service Light on an Opel Adam
Vauxhall Adam (2013-2019 / MK 1) To manually reset the service light on your Opel Adam, follow this procedure. First, get inside the car and turn on the instrument panel. Next, press…
How to reset the service light on a 2012 Opel Adam
How to reset the service light on a 2012 Opel Adam
Vauxhall Adam (2013-2019 / MK 1) Today we will explain the steps to reset the service light, related to the car service, on a 2012 Opel Adam. The steps to follow are: - turn on the c…
How to Manually Reset the Service Light on an Opel Adam
How to Manually Reset the Service Light on an Opel Adam
Vauxhall Adam (2013-2019 / MK 1) To manually reset the maintenance light on your Opel Adam, it only takes a few seconds, and with the following instructions, you will complete the op…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos