Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in the Opel Combo

Model: Vauxhall Combo Combo E, MK 5 - Years 2019-2026
Part: Service warning light

In today’s video, we will see how to reset the service light in the current series of the Opel Combo. First, perform the correct maintenance as outlined in the vehicle’s user manual. Once this is done, you can proceed with the operation. Press and hold the button located on the central dashboard, then turn the ignition key and wait a few seconds for the operation to complete. Once confirmed, you can drive normally or switch off the vehicle. The parameter will be reset according to the values set by the manufacturer in the control unit.

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on an Opel Combo?
How to Reset the Service Light on an Opel Combo?
Vauxhall Combo (2019-2026 / Combo E, MK 5) To reset the Service light on an Opel Combo, press and hold the CHECK button located at the bottom centre of the instrument cluster while it is off. …
How to reset the service light on the Opel Combo E
How to reset the service light on the Opel Combo E
Vauxhall Combo (2019-2026 / Combo E, MK 5) To manually reset the service light on the instrument cluster display of your Opel Combo E, follow these steps. First, enter the cabin and ensure the…
How to Reset the Service Light on the Opel Combo
How to Reset the Service Light on the Opel Combo
Vauxhall Combo (2012-2018 / Combo D, MK 4) In today's video, see how to reset the service light on the Opel Combo; this tutorial also applies to the Fiat Doblò of the same era. First, enter yo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos