Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Astra
    4. : How to replace the thermostat of the Opel Astra 1.7 CDTI

Vauxhall Astra - Video tutorial

Model: Vauxhall Astra Astra H - Years 2004-2010
Part: Thermostat
Operation: How to replace the thermostat of the Opel Astra 1.7 CDTI

In this video tutorial we will see the necessary steps to disassemble and replace the thermostat of the Opel Astra 1.7 CDTI. First of all, we open the bonnet of our car and start disconnecting the thermostat hose by unscrewing the screw of the metal clamp; let the fluid drain into a container for about ten minutes. At this point, unscrew the fixing screws of the thermostat, in order to remove it; now let's replace it with the new one, as well as with the original one, finally topping up with the new coolant suitable for our engine (filling up to the maximum level mark)!


Posted on 3 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Astra 2009-2016 - What does Opel Astra error code 4 mean? Read Answer
    • Astra 1991-1998 - Where is the thermostat located in the Opel Astra F? Read Answer
    • Astra 2009-2016 - What does the CodE4 error code mean on the Opel Astra J series? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos