Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Ignition Cylinder on an Opel Corsa?

Model: Vauxhall Corsa Corsa C - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Checks and maintenance

See other generations:
Video tutorial

This tutorial shows how to remove the ignition cylinder on an Opel Corsa, a very simple and quick operation. First, ensure the vehicle is off, then unclip the upper cover of the steering column.

Using a cross-head screwdriver, unscrew the fastening screws of both control levers. Once done, remove the lower cover of the column, locate the small hole on the upper part of the ignition cylinder, and insert a small screwdriver to unlock the retaining clip.

At this point, you can remove the cylinder and fit the replacement if necessary.


Updated on 12 August 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Starter Motor on Opel Corsa, 1300 MultiJet
Instructions for Removing the Starter Motor on Opel Corsa, 1300 MultiJet
Vauxhall Corsa (2000-2006 / Corsa C) In this video, you will see the main steps to remove the starter motor from an Opel Corsa, as well as from Fiat and Lancia models with the 1300 Multi…
How to remove the starter motor from the Opel Corsa
How to remove the starter motor from the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) In today's tutorial video, we will see the steps to disassemble and replace the starter motor of the Opel Corsa, following the instructions below. Fi…
How to Remove the Starter Motor on an Opel Astra
How to Remove the Starter Motor on an Opel Astra
Vauxhall Corsa (2006-2014 / Corsa D) Here's how to remove the starter motor on an Opel Astra. After removing the engine cover from the car, disconnect the power terminals of the starter …

    Frequently Asked Questions

    • Corsa 1993-2000 - Where is the engine starter relay located in the Opel Corsa B? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos