Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Opel Crossland X

Model: Vauxhall Crossland X MK 1 - Years 2017-2024
Part: Service warning light

In this tutorial video, learn how to reset the maintenance light on the Opel Crossland X. This procedure is necessary after servicing the car, as the light remains on. It is very simple and quick to perform, taking less than 1 minute. To reset the light, first insert the key without starting the ignition, press and hold the check button located in the centre of the dashboard, while holding it down, turn on the ignition without starting the engine. At this point, a countdown will begin; wait for the countdown to finish, then release the button and restart the dashboard to ensure the procedure was successful.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Turn Off the Service Light on an Opel Crossland X
How to Turn Off the Service Light on an Opel Crossland X
Vauxhall Crossland X (2017-2024 / MK 1) How to turn off the service light on an Opel Crossland X? A very simple operation: enter the vehicle, turn on the instrument panel with the appropria…
How to reset the service light on the Opel Crossland X
How to reset the service light on the Opel Crossland X
Vauxhall Crossland X (2017-2024 / MK 1) .. In this video, see how to reset the service light on the Opel Crossland X: first, turn off the vehicle's ignition, then.. …
How to Replace the Remote Battery on an Opel Crossland X?
How to Replace the Remote Battery on an Opel Crossland X?
Vauxhall Crossland X (2017-2024 / MK 1) Replacing the battery in the remote for an Opel Crossland X is a straightforward operation. To open the remote, you will need a small flathead screwd…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos