Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Opel Crossland X 2021

Model: Vauxhall Crossland X MK 1 - Years 2017-2024
Part: Service warning light

If you have a 2021 Opel Crossland X and want to learn how to manually reset the service light on the instrument panel, read this new guide and follow the instructions. First, get into the car and take your seat. Ensure the ignition is off and press the "Check" button located below the display and to the right of the rev counter. At the same time, turn on the ignition and wait for ten seconds. After the countdown, release the "Check" button and you are done.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on an Opel Crossland X
How to Reset the "Service" Light on an Opel Crossland X
Vauxhall Crossland X (2017-2024 / MK 1) Before you begin, sit in the driver's seat of your Opel Crossland X. Start by pressing and holding the "check" button located on the instrument clust…
How to Reset the Service Light on the Opel Crossland X?
How to Reset the Service Light on the Opel Crossland X?
Vauxhall Crossland X (2017-2024 / MK 1) To reset the Service light on the Opel Crossland X, press and hold the CHECK button located in the centre of the instrument panel: while holding this…
How do you reset the Opel Crossland Service light?
How do you reset the Opel Crossland Service light?
Vauxhall Crossland X (2017-2024 / MK 1) The service light of the Opel Crossland must be reset only after performing the scheduled maintenance for that mileage reached and not before. The pl…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos