Do it yourself
| ||||
|
Vauxhall Corsa - Video tutorial
Model: Vauxhall Corsa
Corsa C
- Years 2000-2006 In this video, we see how to read error codes on the dashboard of an Opel/Vauxhall Corsa C: if the engine light comes on, even if it is a yellow/orange light, it would be better to stop the car and understand what problem it is indicating in the following way. Press both feet on the brake and accelerator pedals and keep them pressed. Turn on the ignition but do not start the engine. The codes are made up of 4 digits and the car signals them by flashing. 10 flashes indicate a zero, while the other numbers are signaled normally. There are short pauses between each digit; there are long pauses (about 3 seconds) between each code. The decoding of the codes can be found on specific apps.
Posted on 21 September 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |