Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

This brief video guide shows the entire procedure necessary to reset the service light, which indicates the remaining life of the engine oil, on a first-generation Opel Mokka, produced from 2012 to 2019. Let's start the procedure by turning on the vehicle's ignition without starting the engine, then press the "MENU" button and scroll through the various menu options using the arrow dial until you reach the option for the remaining engine oil life expressed in percentage.

Once there, press the "SET/CLR" button to confirm and complete the reset of the service light.


Updated on 21 August 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service Light on the Opel Mokka?
How to Reset the Oil Service Light on the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To reset the Oil Service light on the Opel Mokka, turn on the ignition by rotating the key in the ignition switch. Press the MENU button located on t…
How to Reset the Service Light on a 2015 Opel Mokka
How to Reset the Service Light on a 2015 Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Below are the steps to reset the service light on your 2015 Opel Mokka. The steps are very simple and are as follows. First, insert the key and turn …
How to Reset the Service Light on the Vauxhall Mokka
How to Reset the Service Light on the Vauxhall Mokka
Vauxhall Mokka (2012-2019 / Mokka A) The service light on the Mokka indicates that routine maintenance is required. If you want to postpone this operation and clear the light from the di…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos