Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Temperature Sensor on the Opel Corsa

Model: Vauxhall Corsa Corsa E - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine coolant temperature sensor

See other generations:
Video tutorial

Let's see how to change the temperature sensor on an Opel Corsa: open the bonnet of the engine compartment and locate the sensor to the left of the cylinder head. Drain the coolant by opening the bleed screw.

Disconnect the electrical connector and, using a socket wrench with an extension, unscrew the sensor. Clean the area around its seat with a cleaning product, screw in the new sensor first by hand, then tighten it with a torque wrench to the correct torque.

Refill the system with new coolant and start the engine, checking that everything functions correctly.


Updated on 29 August 2026 by ScegliAuto


Related tutorials

Replacing the External Temperature Sensor on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In this video, learn how to remove and replace the external temperature sensor on the Opel Corsa D, following the instructions below. First, locate t…
Removing the External Temperature Sensor from an Opel Corsa
Removing the External Temperature Sensor from an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) In this video tutorial, you will see the main steps to remove the external temperature sensor from an Opel Corsa C. This part is replaced when it can…
How do you replace the coolant temperature sensor on the Opel Corsa?
How do you replace the coolant temperature sensor on the Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) In order to replace the coolant temperature sensor on the Opel Corsa, you will need to open the hood to access the components inside the engine compa…

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 2006-2014 - Where is the Opel Corsa coolant temperature sensor located? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos