Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Heating Resistor Located in the Opel Corsa?

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Checks and maintenance

In this video, you can see where the heating resistor is located in the Opel Corsa, useful in case you need to replace it due to a fault. As shown, the resistor is positioned behind the glove compartment on the passenger side and is accessible from underneath the dashboard. To remove and subsequently replace it, first disconnect the large black connector located to the right of the fan, then unscrew the two securing screws and pull it out of the housing. Follow the reverse procedure to fit the replacement.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Heating Resistor of an Opel Corsa
How to Replace the Heating Resistor of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) The heating resistor for the cabin is located at the back of the glove compartment. To begin, sit in the front passenger seat of your Opel Corsa. Sta…
How to Replace the Heating Resistor in an Opel Corsa
How to Replace the Heating Resistor in an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you begin, sit in the front passenger seat of your Opel Corsa. The heating resistor is located at the bottom, beneath the glove compartment. S…
How to replace the heating resistor in the Opel Corsa?
How to replace the heating resistor in the Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) In this tutorial we can see how to replace the heating resistor in the Opel Corsa, an extremely simple and quick operation. First of all, make sure t…

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 1993-2000 - Where is the engine starter relay located in the Opel Corsa B? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos