Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Diagram for an Opel Meriva

Model: Vauxhall Meriva MK 2, Meriva B - Years 2010-2017
Part: Fuse box

In this brief video guide, we will see the location of the three fuse boxes in our second-generation Opel Meriva, produced from 2010 to 2017. The first fuse box is located inside the vehicle's cabin, specifically behind a small plastic panel on the left side of the dashboard and under the steering wheel. The second box is situated in the engine compartment on our right. Finally, the third fuse box is found inside the boot on the left. This guide also includes all the diagrams showing the name, position, and amperage of each individual fuse and relay.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse Diagram for Opel Meriva A
Fuse Diagram for Opel Meriva A
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) .. In this video, we will see the fuse diagram for an Opel Meriva A, following the instructions below. First, locate the different fuse.. …
Fuse Layout and Positioning for the Opel Meriva
Fuse Layout and Positioning for the Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) It is often very useful to know the positioning and layout of the fuses in your vehicle, allowing you to check their operation in case of an electric…
Where are the Fuses Located in the Opel Meriva?
Where are the Fuses Located in the Opel Meriva?
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) The fuse boxes in the Opel Meriva contain the fuses that regulate the operation of the devices installed in the vehicle: this type of car has three b…

Other guides you may be interested in

    Frequently Asked Questions

    • Meriva 2003-2010 - What is the central locking fuse on my Opel Meriva? Read answer
    • Meriva 2003-2010 - Where can i find the EPS fuse on Opel Meriva? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos