Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the external rearview mirror of the Opel Meriva?

Model: Vauxhall Meriva Meriva B, MK 2 - Years 2010-2017
Part: Side mirror

To replace the rearview mirror of the Opel Meriva, you need to use an object to lever off the cover on the back. Once the cover is removed, you can loosen the underlying screws and then disconnect the connectors inside the door. This way, you can completely detach the mirror from its housing in order to insert the new one. The new mirror should be fixed to its housing with the appropriate screws, and then the cover can be installed.

Posted on 16 January 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the external rearview mirror of the Opel Meriva?
How do you replace the external rearview mirror of the Opel Meriva?
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) In order to replace the external rearview mirror of the Opel Meriva, you need to first remove the corresponding door panel: once this is detached, it…
Disassembling the external rearview mirror of the Opel Meriva.
Disassembling the external rearview mirror of the Opel Meriva.
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) Today's guide will show us the main steps that will allow us to disassemble and replace the external rearview mirror of the Opel Meriva. First, we op…
How to replace the external rearview mirror of the Opel Meriva
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) Below we will see the instructions useful for disassembling and replacing the external rearview mirror of the Opel Meriva. First, we open the front d…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos