Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Opel Vivaro

Model: Vauxhall Vivaro MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

When you are about to reach the mileage for the service on the Opel Vivaro, a warning appears on the dashboard to remind you. After completing all operations, you need to reset the warning system. Sit in the driver's seat, turn on the ignition, and using the two buttons at the top of the lever to the right of the steering wheel, select "maintenance intervals" on the display.

Press one of the buttons for five seconds until "service required" appears and the spanner light starts flashing. Press one of the buttons again for ten seconds until you see the updated remaining mileage.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Opel Vivaro
How to Reset the Service Light on the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Reset the service light only after completing the servicing operations. To reset the service light on the Opel Vivaro, follow the same steps as for r…
How to Reset the Service Light on the Opel Vivaro?
How to Reset the Service Light on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) To reset the Service light on the Opel Vivaro, press and hold the CHECK button located in the centre of the instrument cluster while it is off. Conti…
How do you reset the Service light of the Opel Vivaro?
How do you reset the Service light of the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) From the instrument panel of the Opel Vivaro, you can reset the Service indicator by holding down the SET button located in the center of the instrum…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos