Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the automatic gearbox of the Opel Insignia?

Model: Vauxhall Insigna Insigna A, MK 1 - Years 2008-2017
Part: Warning light – error code

In order to reset the automatic transmission of the Opel Insignia, you need to insert the ignition key into the ignition switch, so that you can turn it to start the instrument panel: once the panel has been turned on, you can hold down the accelerator pedal for about five seconds. Releasing it, you can then turn the key in the opposite direction and turn off the instrument panel; once the panel is off, you will need to wait about two minutes and then turn it on again to verify that the reset is complete.

Posted on 10 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Automatic Transmission Oil in the Opel Insignia
How to Replace the Automatic Transmission Oil in the Opel Insignia
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) Here are the instructions for draining and refilling the automatic transmission oil in the Opel Insignia. First, raise the vehicle and start unscrewi…
How to Replace the Gear Knob on an Opel Insignia?
How to Replace the Gear Knob on an Opel Insignia?
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) In this tutorial, see how to replace the automatic gear knob on an Opel Insignia, a very simple and quick operation. Start by unclipping the base of …
How to Replace the Gear Knob on the Opel Insignia
How to Replace the Gear Knob on the Opel Insignia
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) In this video tutorial, you will learn how to remove and replace the gear knob on the Opel Insignia, following the instructions below. First, get in …

Other guides you may be interested in

    Frequently Asked Questions

    • Insigna 2008-2017 - What does the code 20 indicate, in the Opel Insignia? Read answer
    • Insigna 2017-2026 - What does the code 24 error message on Opel Insignia mean? Read answer
    • Insigna 2008-2017 - What does code 89 mean in the Opel Insignia? Read answer
    • Insigna 2008-2017 - What does code 3 mean and how to reset it in the Opel Insignia? Read answer
    • Insigna 2017-2026 - What does the "code 35" error mean in the Opel Insignia? Read answer
    • Insigna 2017-2026 - What does the error code 18 mean on the Opel Insignia? Read answer
    • Insigna 2008-2017 - What does the code 82 of the Vauxhall Insignia mean? Read answer
    • Insigna 2017-2026 - What does the code 79 of the Opel Insignia mean? Read answer
    • Insigna 2008-2017 - What does "Code 59" mean on an Opel Insignia? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos