Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter on an Opel Corsa

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Oil filter

Release the bonnet using the appropriate lever and lift the panel. Locate the oil filter, which is situated next to the engine at approximately mid-height. This replacement is done alongside the oil change, so drain the used oil and prepare a container to collect the contents from the oil sump. Now, using the appropriate tool, remove the oil filter cap, extract the filter from inside, and replace it with the new one. Finally, install the new filter, replace the cap on the oil sump, and add new oil through the designated filler.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement on an Opel Corsa D
Engine Oil and Oil Filter Replacement on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) Today, you will learn how to replace the engine oil and the oil filter while performing the regular maintenance service on an Opel Corsa D. First, li…
How to Replace the Oil Filter in the Opel Corsa E?
How to Replace the Oil Filter in the Opel Corsa E?
Vauxhall Corsa (2014-2019 / Corsa E) Replacing the oil filter in the Opel Corsa E is a task that anyone can perform by following the necessary precautions. For the procedure, follow this…
How to Change the Oil and Oil Filter on Opel Corsa?
How to Change the Oil and Oil Filter on Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) To change the engine oil on the Opel Corsa D, it is recommended to lift the car and remove the Torx 45 screw that secures the oil drain plug. Once th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos