Do it yourself
Frequently asked questions about cars and motorcycles

Where are the fuses located in the Opel Insignia?

Model: Vauxhall Insigna Insigna A, MK 1 - Years 2008-2017
Part: Fuse box

The fuse box of the Opel Insignia, in the engine compartment, is located to the right of the battery compartment; between the battery and the fender pillar. To access the fuses, we release the side tabs of the cover to remove it and reach the fuses. Meanwhile, the fuse box in the cabin is located inside the glove compartment. We find a latch, release it to remove the cover and access the fuses in the cabin. To replace a fuse, we identify it based on the faulty component, grab it with small pliers, extract it and check if the bridge inside is intact. If the bridge is intact, the fuse needs to be replaced, otherwise, if the bridge is broken, the fuse needs to be replaced.

Posted on 23 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Insigna (2017-2026 / MK 2, Insigna B) The fuse boxes of the Opel Insignia contain the fuses that regulate the operation of the devices inside the car: the first is located on the dashboar…
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) In this video we can see where the fuse boxes of the Opel Insignia are located and what their respective diagrams are, to consult in case we need to …
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) On the Opel Insignia, the fuses are contained within dedicated fuse boxes installed in the vehicle. In this type of car, you will find three fuse box…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos