Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on an Opel Agila

Model: Vauxhall Agila Agila B - Years 2008-2015
Part: Fuel pump

Watch this video to learn how to remove the fuel pump from an Opel Agila. Unscrew the tensioner bolts with a socket wrench and pull it away. Start unscrewing the bolts of the fuel pump along with the connecting hoses. Once the part is free from the various hoses, drain the liquid into a container. Now, detach the part from the engine bay along with the gasket (clean thoroughly before reassembly). Install the new part with the gasket in the engine bay. Connect all the hoses to the pump and secure it with the bolts. Finally, reattach the tensioner with the associated belt. Final step: test for correct operation.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD Port on an Opel Agila B
Where to Find the OBD Port on an Opel Agila B
Vauxhall Agila (2008-2015 / Agila B) If you are looking for the OBD port on your Opel Agila B but haven't found it yet, just follow these steps. First, get inside the vehicle and reach t…
How to Reset the Service Light on the Opel Agila?
How to Reset the Service Light on the Opel Agila?
Vauxhall Agila (2008-2015 / Agila B) To reset the Service light on the Opel Agila, press and hold the button located at the bottom left of the instrument panel, next to the clock symbol.…
How to Remove the Headlamp from an Opel Agila?
How to Remove the Headlamp from an Opel Agila?
Vauxhall Agila (2000-2007 / Agila A) This very short video clearly outlines the main steps for the operation described. All the steps shown are for a 2011 Opel Zafira, but they are pract…

Other guides you may be interested in

    Frequently Asked Questions

    • Agila 2008-2015 - How much does it cost to replace the Opel Agila petrol pump? Read answer
    • Agila 2008-2015 - How much does the Opel Agila 1000 petrol pump cost? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos