Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Filter on the Peugeot 3008

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Diesel fuel filter

See other generations:
Video tutorial

To replace the diesel filter on the Peugeot 3008, open the bonnet, remove the engine cover, disconnect the electrical connector and the three fuel line connections using a screwdriver. Unscrew the three Torx screws to remove the filter body and place it in a container to collect any diesel spills.

Open the bleed screw, rotate the central selector, and unscrew the screws to separate the cover from the filter. Remove the gasket from the cover, take the new filter, ensure the cap is closed, insert the cover, rotate the central selector, and secure the assembly with its screws.

Refit the filter into its housing by reversing the previous steps. Operate the pump to fill the filter and replace the cover.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Diesel Filter in a Peugeot 3008
How to Remove and Replace the Diesel Filter in a Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) This video shows how to remove and replace the diesel filter, air filter, and oil filter in a Peugeot 3008. Specifically, we will see the procedure f…
How to Refuel the Peugeot 3008
How to Refuel the Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) Refuelling the Peugeot 3008 is really very simple and intuitive, and it is the same for other vehicles; so ensure the doors are unlocked to open the …
How to Remove the Diesel Filter from a Peugeot 3008?
How to Remove the Diesel Filter from a Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) Before you can start, open the bonnet of your Peugeot 3008. Begin by disconnecting and moving the hoses connected to the diesel filter, unclipping th…

Other guides you may be interested in

    Frequently Asked Questions

    • 3008 2016-2023 - Where is the diesel filter located on my Peugeot 3008? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos