Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb of a Peugeot Expert

Model: Peugeot Expert Mark3, MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tail light bulb

See other generations:
Video tutorial

The following video tutorial will explain the procedure for independently replacing the rear light bulb of a 2019 Peugeot Expert. Start by opening the boot and unscrewing the two screws located along the right light.

Continue by removing the light and disconnecting the connector. Next, open the light housing and remove the bulbs for replacement.

Insert the new bulbs, close the light housing, and reassemble the right light in its housing. Finish by tightening the two screws and closing the boot.

Test the bulbs' functionality by turning on the vehicle's lights.


Updated on 22 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Peugeot Expert?
How to Replace the Front Headlamp Bulb on a Peugeot Expert?
Peugeot Expert (2016-2025 / Mark3, MK 3) To replace the front headlamp bulb on a Peugeot Expert, open the bonnet to access the internal components of the engine bay. Locate the cover panel o…
How to Replace the Front Headlamp Bulb on Peugeot Expert
How to Replace the Front Headlamp Bulb on Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) This video tutorial shows how to replace the front headlamp bulb on a Peugeot Expert. The replacement can typically be done independently by purchasi…
How to replace the front headlight bulb of the 2014 Peugeot Expert
How to replace the front headlight bulb of the 2014 Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) Replacing the headlight bulb of the 2014 Peugeot Expert is a simple and quick operation to be carried out independently. To perform the replacement, …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos