Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the AdBlue light on the Peugeot 308?

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: AdBlue warning light

In order to make the AdBlue warning light on the Peugeot 308 completely disappear from the instrument panel, you will need to top up by adding the necessary amount of additional fluid: to do this, you will need to open the fuel door located on the rear right side of the vehicle. You can now open the blue cap to insert the amount of additional fluid needed to fill the tank: once the top-up is complete, you can close the cap and the fuel door, ensuring that the warning light has disappeared from the vehicle's instrument panel.

Posted on 8 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 308 (2013-2021 / T9, MK 2) If the AdBlue warning light appears on the dashboard of the Peugeot 308, it means that the level of additive liquid inside the appropriate tank is in…
Peugeot 308 (2013-2021 / T9, MK 2) This guide explains how to reset the AdBlue warning light on the Peugeot 308, as well as the 3008. Before resetting, ensure that the AdBlue fluid is …
Peugeot 308 (2013-2021 / T9, MK 2) When the AdBlue light illuminates on the Peugeot 308 display, it means that the level of additive liquid in the designated tank is insufficient. To r…

    Frequently Asked Questions

    • 308 2013-2021 - Where do you refill the AdBlue on the Peugeot 308? Read answer
    • 308 2007-2014 - Where is the AdBlue fuse on a Peugeot 308? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos