Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : How to change the battery of the Peugeot 508 key

Peugeot 508 - Video tutorial

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Key
Operation: How to change the battery of the Peugeot 508 key

Replacing the remote control key battery for this Peugeot model (the procedure is the same for many other models of the French house) is extremely simple since you only have to remove the back shell of the key, the one that bears the logo from the manufacturer: then use a small flat-tip screwdriver with which to pry the front part of the key in order to remove the shell; at this point the battery housing (3 Volt CR 2032 model) is immediately accessible and can therefore be replaced with a new one respecting the direction or polarity.


Posted on 5 October 2023 by ScegliAuto



How to remove the battery of a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Before starting, we will have to open the front hood of our Peugeot 508. So let's start by unhooking the clip that fixes the positive pole to the bat
How do you replace the battery of the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) In order to replace the battery of the Peugeot 508, you need to open the hood so that you can have access to the components located inside the engine
Replacing the battery on Peugeaut 508
Peugeot 508 (2010-2018 / MK 1) Replacement of the battery of the remote control key of the Peugeot 508? Let's see how to do it in this video. We take our ignition remote control an

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos