Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery on the Peugeot 2008 Diesel

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Battery

In this article, we will show you how to replace the battery of the Peugeot 2008. For this operation, a 10mm socket wrench is needed. First, you need to disconnect the positive terminal of the battery, then remove the bolt securing the negative terminal using the 10mm socket wrench. Once the negative terminal is disconnected, you need to remove the cover of the computer next to the battery, then disconnect the 3 connectors. After disconnecting the connectors, remove the bolts securing the computer unit, again using the 10mm socket wrench. Now, pry on the 2 plastic clips to remove it. Once removed, you will have access to the bolt securing the battery, remove it, and then you can replace the battery. Once replaced, reassemble all the components previously removed.

Posted on 14 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Language of the On-Board Computer in the Peugeot 2008?
How to Change the Language of the On-Board Computer in the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) In this tutorial, you will see how to change the language of the on-board computer in the Peugeot 2008, a very simple and quick operation to perform,…
How to change the battery of the Peugeot 2008 II
How to change the battery of the Peugeot 2008 II
Peugeot 2008 (2019-2026 / MK 2) To change the battery of the Peugeot 2008, we first need to locate it: it is located in the engine compartment, on the right side relative to the eng…
How to Replace the Battery on a Peugeot 2008
How to Replace the Battery on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) To change the battery on a Peugeot 2008, open the bonnet and locate the battery. Disconnect the negative terminal first, followed by the positive ter…

How to open the fuel tank door in the Hyundai I20?

In this tutorial we can see how to open the fuel tank door in the Hyundai I20, a very simple operation similar to the typical procedure of many vehicles. First of all, let's go inside the cabin, it is not necessary to insert the key or unlock all the locks, then we locate and operate the lever located in the lower left area of the cabin, right next to the driver's seat. Once we have done this, we exit the vehicle, open the door completely and unscrew the fuel tank cap. To close the door, simply press it gently until you hear a click.

Watch the video!


by ScegliAuto

More videos