Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How to replace the battery on a Peugeot 2008

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Battery
Operation: How to replace the battery on a Peugeot 2008

To change the Peugeot 2008 battery, open the hood of the car and once you have located the battery, first disconnect the negative pole, and then the positive one. Remove the control unit from its housing, turning it on its side so that it does not get in the way of the rest of the work. Lift the battery base locking system and remove it. Flip the second tab and remove the battery. Now scrape the oxide off the clamps with fine sandpaper. Insert the new battery by tilting it to the left and then pushing it down. Sprinkle the terminals with copper grease to improve contact with the cables. Put the battery lock back in place. Put the ECU back in place. Replace the positive terminal and then the negative one. Operation completed.


Posted on 4 September 2022 by ScegliAuto

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - Where is the battery located in the Peugeot 2008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos