Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the ECU and BSI module on the Peugeot 508

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

In this guide we will see the instructions that will allow us to reset the engine control unit and the BSI module of the Peugeot 508, but also on most models of the manufacturer. To perform the forced reset of the engine control unit and the BSI module, it will be necessary to interrupt the power supply of the components, thus disconnecting the battery terminals; wait a few minutes before reconnecting, as shown in the video.

If the problem persists, then it will be necessary to use a specific diagnostic software to restore the problem.


Posted on 1 January 2025 by ScegliAuto


Related tutorials

How to Disable the "Eco" Mode on a Peugeot 508?
How to Disable the "Eco" Mode on a Peugeot 508?
Peugeot 508 (2018-2026 / MK 2) Good morning, today’s goal is to permanently disable the "Eco" mode on your Peugeot 508. Start by turning on the vehicle using the ignition button lo…
How to reset the panoramic roof blind of the Peugeot 508
How to reset the panoramic roof blind of the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) In this guide we will see the instructions that will allow us to reset the motor of the sunroof blind of the Peugeot 508. First of all, we get on boa…
How do you reset the AdBlue warning light on the Peugeot 508?
How do you reset the AdBlue warning light on the Peugeot 508?
Peugeot 508 (2018-2026 / MK 2) To reset the AdBlue warning light on the Peugeot 508, you first need to top up the fluid by inserting the necessary amount of additional liquid: this…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos