Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to solve the problem causing the ASR and ESP warning lights to come on in the Peugeot 508?

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

If the malfunction message of the ASR and ESP systems, respectively the electronic traction control and the electronic stability control system, appears in the instrument panel of our Peugeot 508, it is very likely that the two corresponding fuses are faulty.

They are located in the box inside the engine compartment, next to the negative terminal of the battery.

The two indicated fuses are 20A and 5A. Before replacing them, make sure the key is not inserted and the area is free of dirt, which can be cleaned with a simple contact cleaner. Once replaced, start the vehicle and check if the warning message has disappeared.


Posted on 16 February 2025 by ScegliAuto


Related tutorials

How to reset the ECU and BSI module on the Peugeot 508
How to reset the ECU and BSI module on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) In this guide we will see the instructions that will allow us to reset the engine control unit and the BSI module of the Peugeot 508, but also on mos…
How to Disable the Electronic Traction Control in a Peugeot 508?
How to Disable the Electronic Traction Control in a Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) In this tutorial, see how to disable the electronic traction control in a Peugeot 508, a very simple and quick operation. This system should only be …
How to Reset the Service Light on a Peugeot 508
How to Reset the Service Light on a Peugeot 508
Peugeot 508 (2018-2026 / MK 2) To reset the service light related to the service interval on a Peugeot 508 model R83, do the following: press the SET button on the left stalk of th…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos