|
Do it yourself
| |||
| ||||
How can you start the engine of the Peugeot 3008?
Model: Peugeot 3008
MK 1, T84
- Years 2009-2016
Among the reasons that can surprise us and prevent us from starting the engine of our car, there is certainly the low power battery. Overcoming this is not difficult and this thanks to one of the most well-known and easy-to-implement methods, which is to connect the cables to another battery, always from a car, following the following instructions: connect the two positive poles of the batteries first with the red cable, then the negative ones with the black cable. Now the engine of the support vehicle must be started and after a few seconds the vehicle with the low battery. The cars in the attached video are not Peugeot 3008, but being a standard method, it is valid for any vehicle.
Posted on 12 March 2025 by ScegliAuto
Video tutorial
Related tutorials
Peugeot 3008
(2016-2023 /
MK 2, P84)
In this video we see how to start even when the battery of our Peugeot 3008 remote control is dead: first, we press the button at the top to remove t…
Peugeot 3008
(2016-2023 /
MK 2, P84)
Today, you will learn how to start the Peugeot 3008 using the emergency procedure in case the remote battery is flat. First, remove the metal emergen…
Peugeot 3008
(2016-2023 /
MK 2, P84)
Today we will explain how to reset the daily odometer on Peugeot 3008, Peugeot 508, and Peugeot 5008 vehicles. To perform this simple operation, we n…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.089
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
