Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the AdBlue warning light in the Peugeot Expert compartment?

Model: Peugeot Expert Mark3, MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: AdBlue warning light

See other generations:
Video tutorial

If the AdBlue light in our Peugeot Expert van's instrument panel has turned on, it means that the pollution control system's liquid has reached the minimum level and, consequently, needs to be refilled. This is an extremely simple and quick operation, let's see how to proceed in this tutorial.

First of all, we buy a canister of urea at an auto parts store, then we turn off the engine, open the driver's door, and unscrew the indicated blue cap. At this point, we insert the tube into the hole and add the necessary amount of liquid to reach the maximum level.


Posted on 18 March 2025 by ScegliAuto


Related tutorials

How to reset the AdBlue warning light on the Peugeot Expert?
How to reset the AdBlue warning light on the Peugeot Expert?
Peugeot Expert (2016-2025 / Mark3, MK 3) To reset the AdBlue warning light on the Peugeot Expert, top up the tank with the necessary amount of additive fluid: locate the blue cap that seals …
How to Reset the AdBlue Warning Light on the Peugeot Expert
How to Reset the AdBlue Warning Light on the Peugeot Expert
Peugeot Expert (2016-2025 / Mark3, MK 3) AdBlue is the additive used to reduce nitrogen oxide emissions in diesel engines. Modern vehicles have an additional tank for this additive. The fill…
How to Reset the AdBlue Warning Light on a Peugeot Expert
How to Reset the AdBlue Warning Light on a Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) If the AdBlue warning light comes on during normal driving, along with the engine malfunction light, there is likely an issue with the exhaust gas ma…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos