Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up AdBlue in a Peugeot Expert

Model: Peugeot Expert Mark2, MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: AdBlue warning light

See other generations:
Video tutorial

AdBlue is a special additive introduced in recent years in Diesel vehicles. Its purpose is to reduce environmental impact simply and effectively.

After driving several miles, the amount of liquid in the respective tank may decrease until it runs out, making it necessary to top it up. But how do you do it? First, ensure that the engine is off, then open the front door (driver's side) and locate the small blue cap in the lower area.

Unscrew it and, using a funnel or a rubber hose, pour the new AdBlue into the tank.

Finally, screw the cap back on.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to reset the AdBlue warning light on the Peugeot Expert?
How to reset the AdBlue warning light on the Peugeot Expert?
Peugeot Expert (2016-2025 / Mark3, MK 3) To reset the AdBlue warning light on the Peugeot Expert, top up the tank with the necessary amount of additive fluid: locate the blue cap that seals …
How to reset the AdBlue warning light in the Peugeot Expert compartment?
How to reset the AdBlue warning light in the Peugeot Expert compartment?
Peugeot Expert (2016-2025 / Mark3, MK 3) If the AdBlue light in our Peugeot Expert van's instrument panel has turned on, it means that the pollution control system's liquid has reached the m…
How to Reset the AdBlue Warning Light on the Peugeot Expert
How to Reset the AdBlue Warning Light on the Peugeot Expert
Peugeot Expert (2016-2025 / Mark3, MK 3) AdBlue is the additive used to reduce nitrogen oxide emissions in diesel engines. Modern vehicles have an additional tank for this additive. The fill…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos