Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on a Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Instrument cluster

How to remove the instrument cluster on a Peugeot 207? Here’s how to proceed with the correct removal without issues: disconnect the battery terminals using a suitable spanner, detach the steering lock and move it forward, then remove the securing screws on the instrument cluster with a suitable screwdriver and take them out. After removing the screws, slide the unit out of the dashboard and disconnect the power cable. Fit a new unit or replace the LEDs/bulbs in the cluster and refit it. Finally, reverse the assembly operations.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 207?
How to Reset the Service Light on a Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To reset the Service light on a Peugeot 207, press and hold the button located at the centre of the instrument cluster while it is turned off. Contin…
How to Reset the Oil Warning Light on the Peugeot 207
How to Reset the Oil Warning Light on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To reset the service light on the Peugeot 207, first press the button located on the right side of the instrument cluster. Then, hold the button unti…
Removing the Central Instrument Cluster from a Peugeot 207
Removing the Central Instrument Cluster from a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video, you will see how to remove the central instrument cluster from a Peugeot 207. First, remove the side plastic frames of the instrument …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos