Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Peugeot Boxer?

Model: Peugeot Boxer MK 2 - Years 2006-2024
Part: Service warning light

The Service light that is shown on the instrument panel of the Peugeot Boxer can be reset by turning on the instrument panel, turning the ignition key in the corresponding slot: once the key is turned on, you will need to press the accelerator and brake pedals at the same time for a few seconds. Then, while keeping them pressed, you will need to turn off the instrument panel: once the panel is turned off, you can release the pedals. Finally, you can turn on the instrument panel again, checking that the Service light has disappeared permanently.

Posted on 24 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Peugeot Boxer?
How to Reset the Service Light on Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) To reset the service light on the Peugeot Boxer, simultaneously press the accelerator and brake pedals. While holding the pedals down, insert the ign…
How to Reset the Service Light on the Peugeot Boxer 4?
How to Reset the Service Light on the Peugeot Boxer 4?
Peugeot Boxer (2006-2024 / MK 2) The operations to perform when discussing a service are essentially the oil and oil filter change of the engine, to which, depending on the vehicle's…
How to Reset the Service Light on a Peugeot Boxer?
How to Reset the Service Light on a Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) To reset the Service light on the Peugeot Boxer, turn on the ignition by turning the key. Once the instrument cluster is on, press and hold the accel…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos