Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Peugeot 308 windshield wipers

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Windshield wipers

In this guide we will see how to disassemble and replace the front windshield wipers and the rear windshield wiper of the Peugeot 308. First of all, we get on board the car and with the instrument panel off we lower the windshield wiper lever, putting them in service mode; then we move to the front and release the plastic clip of the windshield wiper, in order to remove it, as shown in the video. At this point we install the new front windshield wiper, with the same dimensions; in the same way we will also replace the rear windshield wiper, following the video tutorial until the end!

Posted on 10 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Blades on a Peugeot 308
How to Replace the Wiper Blades on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Let’s see how to replace the wiper blades on a Peugeot 308: detach the wiper arm from the glass surface, then remove the blade from the arm by pressi…
In the Peugeot 308, how do you adjust the clock?
In the Peugeot 308, how do you adjust the clock?
Peugeot 308 (2013-2021 / T9, MK 2) It is certainly one of the most consulted pieces of information inside one's car, that of the time, and for this reason it is important to always kee…
Replacing the Front Brake Pads on a Peugeot 308
Replacing the Front Brake Pads on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) This guide provides instructions for removing and replacing the front brake pads on a Peugeot 308. First, lift the vehicle and remove the front wheel…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos