Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the rear headlight of the Peugeot Traveller

Model: Peugeot Traveller MK 1 - Years 2016-2024
Part: Tail light

Today we will explain how to replace the rear light of the Peugeot Traveller on your own. To perform the replacement, we need to open the rear hatch and remove the bottom part under the light with a flat-head screwdriver or a plastic removal tool. Using a torque wrench, we unscrew the screws along the inner edge to access the light, which must be disconnected from its connector and removed. We then connect the new light to the connector and tighten the screws, finally repositioning the plastic. Before installing the light, we also replace the bulbs, and to do this we just need to open the dome light cover and proceed with the replacement.

Posted on 13 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot Traveller (2016-2024 / MK 1) The Peugeot Traveller, the minivan shown in the video and of which the disassembly of the rear light is demonstrated, is a vehicle that, like all oth…
Peugeot Traveller (2016-2024 / MK 1) Replacing the battery inside the remote of your Peugeot Traveller is really simple, and with the steps described in the following guide, you will be …
Peugeot Traveller (2016-2024 / MK 1) To replace the engine air filter in your Peugeot Traveller (2016-2023), it only takes a few minutes. In fact, by following the steps outlined in this…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos