Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Peugeot Partner MK2

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

In this video, we will see how to change the battery of the Peugeot Partner MK2: the battery is located on the left side of the engine compartment (when looking at it from the front). On the positive pole of the battery, there are some maxi fuses: we must remove the cover before proceeding; then it's the turn of the negative pole, which we must disconnect to avoid electrical discharges.

Now we remove the maxi fuse plate, from which we removed the cover earlier. Underneath, we find the battery cover, and we remove it. The battery is secured to its base by 10 mm screws, which must be removed.

Now we can remove the battery: we compare the dimensions of the new one with the old one, and proceed with the installation, starting with securing the screws, then the cover, securing the maxi fuse plate with their cover, and connecting the negative pole.

Operation completed.


Posted on 16 June 2025 by ScegliAuto


Related tutorials

How to replace the battery of the Peugeot Partner 2
How to replace the battery of the Peugeot Partner 2
Peugeot Partner Tepee (2008-2018 / B9) The steps to replace the battery of the Peugeot Partner mk2 model are quite simple and quick to perform independently. The first step is to open the …
Where is the Battery Located in the Peugeot Partner?
Where is the Battery Located in the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) In this video, we can see where the battery is located in the Peugeot Partner and how to proceed if we need to replace it, a very simple operation. A…
How to replace the front headlight bulbs of the Peugeot Partner
How to replace the front headlight bulbs of the Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) In this video we can see how to change the bulb of the front headlights of the Peugeot Partner MK2: we need to open the front hood and then enter the…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos