Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the oil and filter on a Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Engine oil

See other generations:
Video tutorial

In this video we see how to change the engine oil and filter on a Peugeot Boxer: in this case the youtuber had a pair of ramps, very useful if we have a commercial vehicle. We open the oil drain plug and let it flow into a large container, which we will then use for proper disposal at an authorized center: while the oil drains, we also remove the filter with the appropriate strap wrench, and let the oil drain from there as well.

We change the filter, put a new plug and gasket on the sump, and then go to refill with oil from the plug; it takes 5.5 liters of oil, to refill which we will have to lower the vehicle from the ramps. Strictly follow the Manufacturer's instructions for the type of oil and choose quality oil.


Posted on 30 August 2025 by ScegliAuto


Related tutorials

How to change the oil in the 2016 Peugeot Boxer?
How to change the oil in the 2016 Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) In the 2016 Peugeot Boxer, you can perform an oil change yourself without spending on professional labour. Remember, however, that every time you cha…
Replacing the Cabin Air Filter on the Peugeot Boxer
Replacing the Cabin Air Filter on the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) Let's see how to change the cabin air filter on the Peugeot Boxer. Open the glove compartment located in the centre console, unscrew the nine screws …
How to replace the cabin filter in the Peugeot Boxer 2019
How to replace the cabin filter in the Peugeot Boxer 2019
Peugeot Boxer (2006-2024 / MK 2) To correctly replace the cabin filter in your Peugeot Boxer Mk2 (2019), simply follow the steps described in this new mini guide dedicated to you. Fi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos