Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How do we go to replace the remote control battery of a Peugeot 2008

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Key
Operation: How do we go to replace the remote control battery of a Peugeot 2008

How do we go to replace the battery (dead or oxidized) of the remote control key of a Peugeot 2008? Let's see how to proceed: take our remote control and go (with a screwdriver) to pry between the key cover and the plastic cap. We pry until the cap comes off the cover; extract the discharged battery with a screwdriver and replace it with a new one of the same size and voltage. Reassemble the cap on the remote control key until you hear the lock click and check the exact operation of the remote control with the special keypads for opening the doors.


Posted on 2 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Peugeot 2008 2013-2019 - Why is the key not detected in the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - Why doesn't the Peugeot 2008 key work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos