Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the bulbs in the instrument panel of the Peugeot 306.

Model: Peugeot 306 MK 1 - Years 1993-2002
Part: Instrument panel light

Below we will see the steps that will allow us to disassemble and replace the bulbs of the instrument panel of the Peugeot 306. First of all, we get on board the car and start removing the plastic cover of the instrument panel; then we unscrew the fixing screws that we find on the sides of the panel, disconnecting the electrical wiring found on the back, as shown in the video. At this point, we remove the rear plastic cover of the panel to access its bulb bulbs, removing them and replacing them with new ones; finally, we reassemble the instrument panel!

Posted on 24 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Instrument Cluster Bulbs in the Peugeot 306?
How to Replace the Instrument Cluster Bulbs in the Peugeot 306?
Peugeot 306 (1993-2002 / MK 1) To replace the instrument cluster bulbs in the Peugeot 306, you need to unscrew the screws that secure the plastics around the steering column: this …
Removing the Interior Light of Peugeot 306
Removing the Interior Light of Peugeot 306
Peugeot 306 (1993-2002 / MK 1) Is the interior light not working anymore? Let's see how to replace the bulbs in the Peugeot 306. Pry between the light and its lens (without breakin…
What is the fuse diagram for the Peugeot 306?
What is the fuse diagram for the Peugeot 306?
Peugeot 306 (1993-2002 / MK 1) In this video, you can see where the fuse boxes are located in the Peugeot 306 and their respective diagrams, useful in case you need to check the fu…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos