Do it yourself
Frequently asked questions about cars and motorcycles

How to Paint the Plastic Cover of the Boot Lid on a Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Body

Video tutorial

The plastic trim covering the upper edge of the boot lid, known as the spoiler, is secured to the body with six pins, two at each end and another two in the central position: once the boot lid is fully opened, they are easily accessible; after removing the spoiler, you can paint it, ensuring to clean it thoroughly and sand it with fine grit; after painting, during the installation of the spoiler, it is advisable to apply sealant around the fixing holes to prevent water ingress.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

Peugeot 307 (2001-2009 / MK 1) To open the boot of a Peugeot 307 when it is locked, fold down the rear seats completely: this will give you access to the components inside the boot…
Peugeot 307 (2001-2009 / MK 1) Let’s look at removing the covering panel of the rear door on a Peugeot 307. Remove the covering panel to access the faulty speaker. Use a lever to r…
Peugeot 307 (2001-2009 / MK 1) Before starting, open the tailgate of your Peugeot 307. Begin by removing the tailgate panel by unscrewing the fastening screws and unclipping the in…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos