Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb in a Peugeot 107

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

Video tutorial

The selected video tutorial shows how to replace a headlight bulb in a Peugeot 107 car. Open the vehicle's hood and secure it in place using the appropriate support rod. Locate the bulb holder behind the headlight that needs to be replaced. At this point, you will see a round rubber cap, remove it by gently pulling it towards you. Disconnect the electrical connector and release the locking clip.

Finally, remove the old bulb and insert the new one, making sure to pay attention to the orientation. Close the locking clip, reconnect the electrical connector, put the rubber cap back on, and finally turn on the lights to check the outcome.


Posted on 27 October 2025 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb of a Peugeot 107
How to Replace the Front Headlamp Bulb of a Peugeot 107
Peugeot 107 (2005-2014 / MK 1) Before starting, open the front bonnet of your Peugeot 107. Begin by unscrewing and removing the screw that secures the connector located behind the …
How to Replace the Bulbs in the Front Headlamp on a Peugeot 107
How to Replace the Bulbs in the Front Headlamp on a Peugeot 107
Peugeot 107 (2005-2014 / MK 1) Do you want to replace the bulbs in the front headlamp on a Peugeot 107? Let's see how to proceed in the video: Open the bonnet by pulling the lever …
How to Replace the Front Headlamp Bulb on the Peugeot 107?
How to Replace the Front Headlamp Bulb on the Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) To replace the front headlamp bulb on the Peugeot 107, open the bonnet to access the bolts located at the top of the headlamp. Once these bolts are l…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos